Update module github.com/redis/go-redis/v9 to v9.23.0

[renovate]

This PR contains the following updates:

Package	Change	Age	Confidence
github.com/redis/go-redis/v9	v9.22.0 → v9.23.0

---

Release Notes

redis/go-redis (github.com/redis/go-redis/v9)

v9.23.0: 9.23.0

Compare Source

This is a minor release. It contains everything from 9.23.0-beta.1, so these notes cover the full 9.22.0 → 9.23.0 upgrade.

⚠️ Changes to check when you upgrade from 9.22.0:

• Go 1.26 is now the minimum Go version (#​4060). The go directive of the root module and of the submodules moved from 1.24 to 1.26, as part of the dependency bumps for govulncheck findings. Projects that build with Go 1.24 or 1.25 must upgrade the toolchain.
• Each Client has a dedicated pipeline connection pool (#​4002). This includes failover clients and cluster node clients. Pipeline, TxPipeline, and autopipeline operations use this pool, so they do not compete with regular commands for main-pool connections. The pool is for burst capacity only: it dials only when necessary, an unused pool holds zero connections, and if the pool is full an operation uses the main pool. Set PipelinePoolSize: -1 to get the previous single-pool behavior.
• AutoPipelineOptions.MaxBatchBytes has a default of 128 KiB (before, there was no limit). The default prevents a write/reply deadlock; it is not a throughput control. The buffers of the pipeline pool also have a default of 128 KiB.

⚠️ Changes to experimental APIs since 9.23.0-beta.1 (no effect if you upgrade from 9.22.0):

• AutoPipelineOptions.FullDuplexFastSubmit is removed (#​4018). The submit channel is replaced by a queue that takes a full wave of commands in one lock, so the separate fast path is not necessary. Remove the field from your options.
• Options.ClientSideCacheRefreshRecencyWindow is removed (#​4034). Refresh-on-invalidate now reads again every cached entry of an invalidated key and does not look at how recently the entry was read. On a write-heavy keyspace this means refresh traffic across the full resident cache. Remove the field from your options.
• LocalCache.LRUClock() is removed (#​4034). It returned the recency token that the removed recency window used, and has no replacement. Remove calls to it.
• ClientSideCacheInvalidationBatchWindow served stale values in beta.1 (#​4033). Under load the batcher applied only ~15% of invalidations, and the cache served invalidated values with a ~100% hit rate. 9.23.0 applies all of them. If you used this option on beta.1, upgrade.

🚀 Highlights

Full-Duplex Auto-Pipelining (Experimental)

Set AutoPipelineOptions.FullDuplex to enable the full-duplex mode of the automatic pipeliner. The default mode sends one batch per round trip. In full-duplex mode the engine holds one pipeline-pool connection, and a writer goroutine and a reader goroutine move the ordered command stream in both directions at the same time. On a high-latency link each command completes in approximately one round-trip time (RTT) on a single connection. On a 50 ms WAN profile: ~389k ops/s at 52 ms p50, against ~207k ops/s at 116 ms on the half-duplex ordered path.

The mode works on both faces of a standalone Client (AutoPipeline() and AsyncAutoPipeline()), and natively on a ClusterClient when routing goes to masters only. On a cluster, one child engine per master sends each command to the node that owns its slot, and follows MOVED / ASK redirects and retryable replies (LOADING, READONLY, ...) through the usual cluster redirect path. With replica routing (ReadOnly, RouteByLatency, or RouteRandomly), the autopipeliner uses the half-duplex shard flushers, which obey the shard picker. Config().FullDuplex reports the mode in effect.

Options:

• FullDuplexWindow — the maximum number of commands in flight (backpressure).
• FullDuplexIdleTimeout and FullDuplexMaxHold — when the engine returns the held connection to the pool. The pool hooks then do re-authentication and maintenance-notification handoffs.
• MaxFlushDelay — now also used in full-duplex mode (#​4014). The writer waits only when enough commands are in flight, so low-concurrency callers keep the 1×RTT behavior. With MaxFlushDelay=250µs at 1024 callers: +22% ops/s and −26% p99. The default is 0, so this is opt-in.
• NumShards — on a standalone Client, the number of full-duplex engines (#​4022). See below.

Pipeline() on the full-duplex connection (#​4021). Standalone Client only. Before, ap.Pipeline() used a pooled connection for each Exec. It now submits the batch to the engine as one contiguous run (FDPipelined), so replies come back in submit order, as on a dedicated connection. At 256–1024 callers with 10 commands per Exec: +49% to +52% throughput on one socket instead of ~150. Errors, retries, hooks, and metrics behave like an ordinary pipeline. A batch that cannot use the stream (a blocking command, a per-command read timeout, a diverted command, or a batch larger than the queue) falls back to the ordinary pipeline. TxPipeline stays on a pooled connection, because MULTI/EXEC needs connection affinity. On a ClusterClient, ap.Pipeline() is still the ordinary cluster pipeline. A batch that the queue cannot admit now reserves its slots and waits in a first-come line, so single commands cannot starve a long pipeline (#​4057, merged as part of #​4021) by @​vlady-kotsev.

Several engines on one client (#​4022). With FullDuplex, NumShards > 1 now means N engines on one client: one pool, one hook chain, N held connections. Commands route by a hash of their first key, so commands on the same key stay on one connection and keep their order without Unordered. Keyless commands are distributed round-robin. An FDPipelined batch stays on one engine. The pipeline pool must hold at least NumShards connections for each full-duplex autopipeliner. More engines help only under high concurrency: with 10-command pipelines, 8 engines were 30% slower than 1 at 8 callers, equal at about 128 callers, and 2.2× faster at 1024 callers.

The full-duplex path supports blocking commands, Options.Limiter (one admission per written batch), per-command and pipeline hooks, OTel metrics, retry budgets (a NoRetry command is never sent again after it is on the wire), and seamless maintenance handoffs. Limits of the stream model:

• A hook can observe a command, but cannot stop it. A ProcessHook that returns without calling next does not cancel the command on the full-duplex path; the command is already queued on the held connection. Run policy or kill-switch hooks on a plain client or on the half-duplex autopipeliner.
• Diverted commands are not ordered with the stream. The engine diverts blocking commands, connection-hostile commands, and managed HIMPORT commands. On the async face, wait for the result of a diverted command before you submit a command that depends on it.
• Single commands on the full-duplex stream do not use the client-side cache. If CSC is enabled, a cacheable command on the stream does not read or write the cache.
• Duration metrics are recorded per reply. A command that fails before it reaches the reader (lease failure, limiter denial, retry exhaustion, close) calls the error callback but records no operation-duration sample.

rdb := redis.NewClient(&redis.Options{
	Addr: "localhost:6379",
	AutoPipelineOptions: &redis.AutoPipelineOptions{
		FullDuplex: true, // stream commands on one held connection, ~1 RTT each
	},
})
defer rdb.Close()

// Deferred face: calls return immediately; result accessors block until executed.
ap, err := rdb.AsyncAutoPipeline()
if err != nil {
	panic(err)
}
cmds := make([]*redis.StatusCmd, 0, 1000)
for i := 0; i < 1000; i++ {
	cmds = append(cmds, ap.Set(ctx, fmt.Sprintf("key:%d", i), i, 0))
}
for _, cmd := range cmds {
	if err := cmd.Err(); err != nil {
		// handle error
	}
}

// Or the blocking face — a drop-in Cmdable where each call blocks like a
// plain client while concurrent callers share the full-duplex pipe:
//	ap, err := rdb.AutoPipeline()
//	val, err := ap.Get(ctx, "key").Result()

Runnable examples: example/autopipeline (all faces), example/autopipeline-fullduplex (blocking face, Pipeline() and FDPipelined), and example/autopipeline-fullduplex-async (async face, Submit, NumShards) (#​4061).

Experimental: the auto-pipelining APIs can change in a minor release.

(#​4002, #​4014, #​4018, #​4021, #​4022) by @​ndyakov

Client-Side Caching: Refresh-on-Invalidate, Miss Coalescing, Faster Reads

Two new functions for the experimental shared-tracking client-side cache. They have no effect unless CSC is enabled (#​3989) by @​ndyakov:

• Refresh-on-invalidate (Options.ClientSideCacheRefreshOnInvalidate): when an invalidation push arrives, the client reads every cached entry of that key again in the background, so the next reader does not pay the miss. Each invalidation of a cached key costs one background read. ClientSideCacheInvalidationBatchWindow collects invalidation-driven deletes into background batches; without it, the connection reader applies each delete inline.
• Miss coalescing (Options.ClientSideCacheCoalesceMisses): concurrent cache misses are pipelined on one tracked connection. Each miss keeps its own per-key command (no rewrite to MGET), so it is safe on a cluster. Each reply is written to the cache with the connection's tracking generation, so the server can invalidate it.

Both options need the built-in cache (ClientSideCacheConfig, or ClientSideCache set to a *LocalCache). With a custom Cache implementation they are ignored.

The cache read path is also faster (#​4034, #​4035, #​4036, #​4037) by @​ndyakov. A hit no longer writes a timestamp to the entry; a second-chance bit marks reads, and is set only under eviction pressure. The cache key is built in pooled scratch memory, the key list is built only on a miss, and nil/status/bulk-string hits are decoded without allocation. Against 9.23.0-beta.1 on a warm cache: +18% to +57% reads/s from 4 to 1024 callers, p50 from 2.6–5.4 µs to 1.0–1.5 µs, with identical hit rates and 100% of invalidations applied.

Better Distribution for Latency-Based Cluster Read Routing

RouteByLatency selects the node with the strictly minimum latency. The measurement has noise (the mean of ten pings, refreshed at most every 10 s), so all clients can select the same node from a set of nodes with almost equal latency. In one production system, GET rates across five replicas in one availability zone had a 590× spread.

The new ClusterOptions.RouteByLatencyTolerance widens the selection to every node within the tolerance of the fastest node, and distributes reads across them round-robin with the ShardPicker. A node in a different availability zone stays outside a sensible tolerance, so zone locality is kept. The default is zero (strict minimum). The option is also on FailoverOptions, for clients from NewFailoverClusterClient; the plain NewFailoverClient does not support latency routing. (#​3973) by @​jozenstar

The same work fixed a routing defect: the client recorded the nearest healthy node only when that node was also the fastest overall. A node that fails fast (for example, a refused connection) hid every healthy node, and reads went to the failing node. The client now records the healthy minimum separately. (#​3994) by @​jozenstar

EphemeralConn for Session-Scoped Work

Client.Conn() returns its connection to the parent pool on Close. If you ran AUTH or SELECT on it, later commands on the pooled client run as that ACL user and in that DB. The new Client.EphemeralConn() returns the same sticky connection, but Close removes it from the pool instead. The cost is one dial per EphemeralConn. Client.Conn() is unchanged. (#​4039) by @​saddamr3e

✨ New Features

• Full-duplex auto-pipelining: AutoPipelineOptions.FullDuplex, with FullDuplexWindow / FullDuplexIdleTimeout / FullDuplexMaxHold, on standalone and cluster clients (#​4002) by @​ndyakov
• Pipeline() on the full-duplex connection: ap.Pipeline() and FDPipelined submit a batch to the engine as one contiguous run, on a standalone Client (#​4021) by @​ndyakov
• Several full-duplex engines on one client: NumShards > 1 with FullDuplex on a standalone Client, with key-hash routing (#​4022) by @​ndyakov
• AutoPipelineOptions.MaxQueuedCommands: an opt-in hard limit on accepted, not-yet-completed autopipeline commands. At the limit a command fails immediately with ErrAutoPipelineQueueFull, so memory does not grow without limit when the server is slow. With FullDuplex, the ordered stream is bounded by FullDuplexWindow instead (a full window blocks the submitter, it does not reject), and MaxQueuedCommands limits only the commands that run outside the stream (blocking, connection-hostile, Do). The default 0 means no limit (#​4070) by @​ndyakov
• Dedicated pipeline pool by default: PipelinePoolSize has a default of DefaultPipelinePoolSize (10) on each client. If the pool is full, an operation uses the main pool. Set -1 to disable the pool (#​4002, #​3959) by @​ndyakov
• CSC refresh-on-invalidate and miss coalescing: Options.ClientSideCacheRefreshOnInvalidate (with ClientSideCacheInvalidationBatchWindow) and Options.ClientSideCacheCoalesceMisses (#​3989) by @​ndyakov
• Client.EphemeralConn: a sticky connection that is removed from the pool on Close, for session-scoped AUTH / SELECT work (#​4039) by @​saddamr3e
• RouteByLatencyTolerance: distributes reads across nodes with almost equal latency, on cluster clients and on NewFailoverClusterClient (#​3973) by @​jozenstar
• AutoPipeliner.WaitClosed: blocks until the drain of accepted commands completes, and returns the drain result. Use it in a wrapper that must not close shared pools during a flush (#​3998) by @​ndyakov
• redisotel-native WithRecordNilErrors: opt in to count redis.Nil replies as client errors (see the fix below) (#​4025) by @​lazerg
• CMSInfo.CellSize: the cell-size field of CMS.INFO in Redis 8.12 (#​4010) by @​elena-kolevska

🐛 Bug Fixes

• CSC invalidation batching: ClientSideCacheInvalidationBatchWindow applied only ~15% of invalidations under load, so the cache served stale values with a ~100% hit rate. Each batch now takes each shard lock once, and 100% of invalidations are applied (#​4033) by @​ndyakov
• Pool waiter wake-ups: Put did not wake a worker that waited for a connection to become IDLE, so a streaming-credentials re-auth could stall until PoolTimeout and then close the connection (#​4028) by @​avitenzer. Two related waiter-queue races are fixed: a failed transition left a dead waiter queued, which later moved a connection to UNUSABLE for nobody (#​4072) by @​ndyakov
• Command key positions: 16 typed commands (BitOp*, MIGRATE, OBJECT ENCODING/FREQ/IDLETIME/REFCOUNT, XINFO STREAM/GROUPS/CONSUMERS, LMPOP, BLMPOP, SINTERCARD, ZINTERCARD, ZMPOP, BZMPOP) routed by the wrong argument. On a Ring they went to the wrong shard; on a cluster they cost an extra MOVED round trip. A raw FCALL / FCALL_RO hashed the function name. All now route by their key (#​4048) by @​ndyakov. Raw XGROUP, ZUNION / ZINTER / ZDIFF, SDIFFCARD / SUNIONCARD, TS.NRANGE / TS.NREVRANGE, and HIMPORT SET forms are also fixed (#​4022)
• Millisecond expirations: PExpireAt, HPExpireAt, and HPExpireAtWithArgs overflowed for dates outside the nanosecond range (for example, year 2270), so Redis deleted the key or rejected the command (#​4026) by @​jakezwang. SetArgs.ExpireAt now sends PXAT when the deadline has millisecond precision; before, EXAT dropped the milliseconds (#​4053) by @​LindseyZ1205
• Cluster -1 timeouts: a -1 read/write timeout on ClusterOptions gave node clients the 5 s default instead of no timeout (fixes #​4049) (#​4050) by @​lazerg
• OTel redis.Nil as error: a cache miss (redis.Nil) incremented redis.client.errors and was tagged as a server error on db.client.operation.duration. Nil replies are now classified NIL and not counted, unless WithRecordNilErrors(true) is set (fixes #​4024) (#​4025) by @​lazerg
• Credential redaction: SENTINEL SET ... auth-pass is now redacted in command rendering (used by redisotel / rediscensus span attributes), and a MIGRATE password with the literal value auth / auth2 is redacted at the correct position (#​4011) by @​saddamr3e
• Min/max aggregator panic: a non-numeric shard reply made AggMinAggregator / AggMaxAggregator panic instead of returning an error from Result() (#​4056) by @​Suselz
• ParseURL skip_verify: an invalid value (for example, skip_verify=yes) was silently treated as false. ParseURL and ParseFailoverURL now return an error, like for the other boolean options (#​4064) by @​orinnz
• uintptr arguments: uintptr and *uintptr are now encoded like the other unsigned integers; a nil *uintptr is encoded as 0 (fixes #​3100) (#​4054) by @​yamaankhan20
• Cluster read routing: the client records the nearest healthy node separately from the overall minimum, so a node that fails fast does not hide the healthy nodes (#​3994) by @​jozenstar
• Probabilistic *.INFO forward compatibility: the BF.INFO / CF.INFO / CMS.INFO / TOPK.INFO / TDIGEST.INFO parsers skip unknown fields instead of returning an error. Redis 8.12 adds cell size to CMS.INFO (#​4010) by @​elena-kolevska
• NewClient panic leak: a panic during construction (for example, a maintnotifications failure in ModeEnabled) does not leak the connection pools that already exist, and a typed-nil pool cannot hide the initial panic (#​4003) by @​ndyakov. The same guards apply to NewFailoverClient (#​4002)
• File-descriptor leak on rejected connections: Conn.Close does the socket teardown and the unsubscribe/CSC callbacks when the connection is already CLOSED. Before, init and auth failures leaked open descriptors (fixes #​3982) (#​3985) by @​ndyakov
• Global logger races: atomics protect the global Logger and LogLevel, and call-site attribution is correct again (#​3988) by @​saddamr3e
• Conn.onClose data race: the close hooks that init installs (onClose and onCscClose) are atomic against a concurrent Close (#​3966) by @​saddamr3e
• Reply-parser hardening: the reply parsers accept zero-length entry arrays (#​3995), and FTHybridCmd reads the full RESP3 map reply without desynchronizing the connection (#​3956) by @​saddamr3e
• CLIENT INFO forward compatibility: the parser skips unknown client-flag characters instead of failing the reply (#​3977) by @​ndyakov
• GEOSEARCH duplicate args: the command no longer sends duplicate arguments (#​3955) by @​mehmettokgoz
• MSetEX cluster routing: the constructor sets the first-key position, so typed calls go to the correct slot (#​3984) by @​shivamrustagi
• Maintenance notifications: no endpoint DNS detection when the mode is disabled (#​3969) by @​Phalanyx
• Autopipeliner Close: a concurrent Close does not block (no re-entrant deadlock), and WaitClosed returns the drain result (#​3998) by @​ndyakov
• Buffered-push log noise: the buffered-push-data notice in isHealthyConn is logged only at debug level, so CSC invalidations do not fill the log (#​3948) by @​ndyakov
• Sentinel teardown order: close hooks run in LIFO order, so an autopipeliner drain completes before Sentinel discovery stops, and a closed failover client cannot recreate its Sentinel resources from a late dial (#​4002) by @​ndyakov
• Pipeline desync containment: if a pre-write push-notification drain fails or a command encoder panics, the Pipeline / TxPipeline path removes the connection instead of returning a desynchronized connection to the pool (#​4002) by @​ndyakov

⚡ Performance

• CSC read path: second-chance read bit, pooled cache-key scratch, key list built only on a miss, allocation-free decode of simple hits. +18% to +57% reads/s against 9.23.0-beta.1 on a warm cache (#​4034, #​4035, #​4036, #​4037) by @​ndyakov
• Full-duplex reads and submit queue: replies already in the buffer are read as one group (one read deadline per group, not per reply), and a mutex+slice queue replaces the submit channel, so the writer takes a whole wave in one lock (#​4018) by @​ndyakov
• Full-duplex MaxFlushDelay: opt-in write coalescing under load. With 250 µs at 1024–2048 callers: +22% to +25% ops/s and −26% to −29% p99; 30% less CPU at 256 callers (#​4014) by @​ndyakov
• Full-duplex allocations: a ring buffer holds the in-flight queue, and the blocking face uses a pool of batches. 770 B/op → 353 B/op at 2048 concurrent callers (#​3970, part of #​4002) by @​ndyakov
• Zero-copy scan: Scan gets zero-copy semantics, and the RESP reader skips unnecessary data conversions (#​3972) by @​vlady-kotsev
• Autopipeline straggler hold: the engine limits the hold on queued commands when the pipeline pool has a free connection. Uncached p95 on a 50 ms link: 111 ms → 65 ms; real-WAN uncached p99: 314 ms → 177 ms (#​3962) by @​ndyakov

🧪 Testing & Infrastructure

• Go 1.26 and govulncheck dependency bumps: the minimum Go version is 1.26, CI defaults to 1.26, and a new go-versions job builds the test matrix from go.mod plus oldstable / stable (#​4060) by @​vlady-kotsev
• Fast skip gates: tests do a TCP probe of each address before the Ping gate, which removes ~1.6 min of dial-retry waits when the full stack is not running (#​4001) by @​ndyakov
• Redis Enterprise coverage: the autopipeline suites connect to the RE database and use the suite DB (#​3976, #​3975), timing assertions scale to the measured RTT (#​3978), and the CLIENT INFO tracking-flag assertion is skipped behind the RE proxy (#​3981) by @​ndyakov
• Docs: UniversalOptions documents ReadTimeout / WriteTimeout / ContextTimeoutEnabled (#​4047) by @​lazerg; the README describes DisableIdentity as client identification (CLIENT SETINFO), not identity verification (#​4059) by @​FanWu-ai
• Security policy: send vulnerability reports to the Redis VDP (#​3949) by @​ndyakov

👥 Contributors

We thank all the contributors who worked on this release!

@​avitenzer, @​elena-kolevska, @​FanWu-ai, @​jakezwang, @​jozenstar, @​lazerg, @​LindseyZ1205, @​mehmettokgoz, @​ndyakov, @​orinnz, @​Phalanyx, @​saddamr3e, @​shivamrustagi, @​Suselz, @​vlady-kotsev, @​yamaankhan20

---

Full Changelog: redis/go-redis@v9.22.0...v9.23.0

---

Configuration

📅 Schedule: (UTC)

• Branch creation
  • At any time (no schedule defined)
• Automerge
  • At any time (no schedule defined)

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[renovate]

ℹ️ Artifact update notice

File name: go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 1 additional dependency was updated

Details:

Package	Change
go.uber.org/atomic	v1.11.0 -> v1.12.0

File name: redisconn/go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 2 additional dependencies were updated

Details:

Package	Change
go.uber.org/atomic	v1.11.0 -> v1.12.0
golang.org/x/sys	v0.30.0 -> v0.48.0