KiCad designs for the MELOPHOS hub and its light bars.
Note
This is a read-only copy published from melophos/melophos. Open issues and pull requests there.
| Folder | Board | Status |
|---|---|---|
hub/ |
The hub: ESP32-S3, USB-C power, USB host port, LED outputs, MIDI jacks, audio input | Rev A in design |
keys-octave/ |
Octave LED bar: 12 LEDs at real key spacing, daisy-chained | Rev A in design |
frets/ |
Fret bar: one LED per string per fret for guitars | Planned for v3 |
enclosures/ |
3D-printable hub case and bar mounting rail | Planned |
bom/ |
Bills of materials | Draft |
- KiCad 9 for schematics and layout
- FreeCAD or OpenSCAD for enclosures, exported to STEP and STL
Important
Commit the KiCad sources (.kicad_pro, .kicad_sch, .kicad_pcb) with every change, never only exported Gerbers. The hardware licence expects the files others can edit.
| Load | Worst case | Typical |
|---|---|---|
| ESP32-S3 module with Wi-Fi | 0.5 A | 0.15 A |
| Instrument on the USB host port | 1.0 A (capped by the power switch) | 0.3 A |
| 88 LEDs at the firmware's brightness cap | 3.0 A (capped in firmware) | 0.2 A |
A 5 V 6 A supply covers the worst case with headroom.
CERN Open Hardware Licence Version 2, Strongly Reciprocal. See LICENSE.