This is a very simple Arduino application that can spoof the serial protocol of the classic GameBoy Printer. If you wire it correctly to a GameBoy transfer cable, you can get those long-lost images off of your GameBoy Camera.
- An Arduino board, such as the classic Arduino Nano. I did this project over 10 years ago on an ATmega328-based board. I think that's the minimum to be fast enough to execute the protocol properly.
- Some version of the Arduino IDE or a way to compile/upload the .ino sketch
- Install pillow for generating the images with Python (now updated for version 3)
- Use the Arduino IDE to compile and upload GBPrinter.ino to any compatible Arduino device.
- Connect the Input, Clock, and Output cables from one end of a GameBoy transfer cable to pins 2, 3, and 4.
- When a GameBoy Printer command is sent over the wire, the Arduino program will dump a readout of the image over the serial channel
- That program output text can then be passed into
gbp_parser.pyto re-construct the image
There are probably a million of these out there, but this is mine.