Fuse-ext2 is a EXT2/EXT3/EXT4 filesystem support for fuse and is built to work with osxfuse.
Fuse-ext2 requires at least Fuse version 2.6.0 for Linux.
Fuse-ext2 requires at least Fuse for macOS version 2.7.5 or greater.
- Linux: Fuse
- macOS: Fuse for macOS
Fuse for macOS can be installed via homebrew if Homebrew-Cask has been tapped.
To tap Homebrew-Cask
brew tap homebrew/caskTo verify the the above tap is apart of brew
brew tapLook for homebrew/cask in the output.
To install Fuse for macOS using brew
brew cask install osxfuseBuild from source depends on:
- m4
- autoconf
- automake
- libtool
- libfuse-dev
- e2fsprogs
- comerr-dev
- e2fslibs-dev
$ apt-get install m4 autoconf automake libtool
$ apt-get install libfuse-dev e2fsprogs comerr-dev e2fslibs-dev
$ ./autogen.sh
$ ./configure
$ make
$ sudo make installYou can use checkinstall or some other equivalent tool to generate install
package for your distribution.
Install via pkg:
$ pkg install sysutils/fusefs-ext2Build via ports:
$ cd /usr/ports/sysutils/fusefs-ext2
$ make install cleanDependencies:
OSXfuse Build from source depends on:
- m4
- autoconf
- automake
- libtool
- e2fsprogs
- xcode-select
Copy and paste this into a file such as /tmp/ext4/script.sh. Remember to chmod +x script.sh. Run it
from that directory - ./script.sh
export PATH=/opt/gnu/bin:$PATH
export PKG_CONFIG_PATH=/opt/gnu/lib/pkgconfig:/usr/local/lib/pkgconfig:$PKG_CONFIG_PATH
mkdir fuse-ext2.build
cd fuse-ext2.build
if [ ! -d fuse-ext2 ]; then
git clone https://github.com/alperakcan/fuse-ext2.git
fi
# m4
if [ ! -f m4-1.4.17.tar.gz ]; then
curl -O -L http://ftp.gnu.org/gnu/m4/m4-1.4.17.tar.gz
fi
tar -zxvf m4-1.4.17.tar.gz
cd m4-1.4.17
./configure --prefix=/opt/gnu
make -j 16
sudo make install
cd ../
# autoconf
if [ ! -f autoconf-2.69.tar.gz ]; then
curl -O -L http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz
fi
tar -zxvf autoconf-2.69.tar.gz
cd autoconf-2.69
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
# automake
if [ ! -f automake-1.15.tar.gz ]; then
curl -O -L http://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
fi
tar -zxvf automake-1.15.tar.gz
cd automake-1.15
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
# libtool
if [ ! -f libtool-2.4.6.tar.gz ]; then
curl -O -L http://ftpmirror.gnu.org/libtool/libtool-2.4.6.tar.gz
fi
tar -zxvf libtool-2.4.6.tar.gz
cd libtool-2.4.6
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
# e2fsprogs
if [ ! -f e2fsprogs-1.43.4.tar.gz ]; then
curl -O -L https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.43.4/e2fsprogs-1.43.4.tar.gz
fi
tar -zxvf e2fsprogs-1.43.4.tar.gz
cd e2fsprogs-1.43.4
./configure --prefix=/opt/gnu --disable-nls
make
sudo make install
sudo make install-libs
sudo cp /opt/gnu/lib/pkgconfig/* /usr/local/lib/pkgconfig
cd ../
# fuse-ext2
export PATH=/opt/gnu/bin:$PATH
export PKG_CONFIG_PATH=/opt/gnu/lib/pkgconfig:/usr/local/lib/pkgconfig:$PKG_CONFIG_PATH
cd fuse-ext2
./autogen.sh
CFLAGS="-idirafter/opt/gnu/include -idirafter/usr/local/include/osxfuse/" LDFLAGS="-L/opt/gnu/lib -L/usr/local/lib" ./configure
make
sudo make installThe e2fsprogs live in /opt/gnu/bin and /opt/gnu/sbin, fuse-ext2 is in /usr/local/bin
cd
dd if=/dev/zero of=/tmp/test-fs.ext4 bs=1024 count=102400
/opt/gnu/sbin/mkfs.ext4 /tmp/test-fs.ext4
mkdir -p ~/mnt/fuse-ext2.test-fs.ext4
fuse-ext2 /tmp/fuse-ext2.test-fs.ext4 -o rw+,allow_other,uid=501,gid=20To verify UID and GID of the user mounting the file system
idTo verify the file system has mounted properly
mountSee Man page for options.
Usage: fuse-ext2 <device|image_file> <mount_point> [-o option[,...]]
Options: ro, rw+, force, allow_other
Please see details in the manual.
Example: fuse-ext2 /dev/sda1 /mnt/sda1
- Multithread support is broken for now, so forcing fuse to work single thread.
- there are no known bugs for read-only mode, read only mode should be ok for every one.
- although, write support is available please do not mount your filesystems with write support unless you do not have anything to loose.
Please send output the output of below command while reporting bugs as GitHub Issue. Before submitting a bug report, please look at the existing issues first.
$ /usr/local/bin/fuse-ext2 -v /dev/path /mnt/point -o debugPlease do not use comma , in partition labels.
Wrong: e2label /dev/disk0s3 "linux,ext3"
Correct: e2label /dev/disk0s3 "linux-ext3"
Alper Akcan alper.akcan@gmail.com