From a2aa543f0fcd36aac72e395a4ea78349b7d43315 Mon Sep 17 00:00:00 2001 From: Faruque Ansari Date: Tue, 6 Oct 2026 10:32:59 +0530 Subject: [PATCH 1/4] Revert "FROMLIST: arm64: dts: qcom: monaco-evk: Extract common EVK hardware into shared dtsi" This reverts commit 8fad712c243a025edd8e4f8f5a9bd89a06bf34fc. Rebasing to v5 of the monaco-ac EVK series, which drops the shared monaco-evk-common.dtsi in favor of fully independent monaco-evk.dts and monaco-ac-evk.dts board files. Fold the dtsi's shared hardware description directly into each board file and delete the dtsi. Link: https://lore.kernel.org/all/20260626111301.3479559-1-umang.chheda@oss.qualcomm.com/ Signed-off-by: Faruque Ansari --- arch/arm64/boot/dts/qcom/Makefile | 4 - arch/arm64/boot/dts/qcom/monaco-ac-evk.dts | 31 - .../boot/dts/qcom/monaco-evk-common.dtsi | 1068 ----------------- arch/arm64/boot/dts/qcom/monaco-evk.dts | 1057 +++++++++++++++- 4 files changed, 1056 insertions(+), 1104 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/monaco-ac-evk.dts delete mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-common.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0f3b82e3dd78d..0613910d74cb1 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -74,7 +74,6 @@ dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-raspberrypi-dsi-7inch.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtbo dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza.dtb -dtb-$(CONFIG_ARCH_QCOM) += monaco-ac-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb monaco-arduino-monza-el2-dtbs := monaco-arduino-monza.dtb monaco-el2.dtbo @@ -96,9 +95,6 @@ monaco-evk-camera-imx577-dtbs := monaco-evk.dtb monaco-evk-camera-imx577.dtbo dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-camera-imx577.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-camera-imx577.dtbo -monaco-ac-evk-ifp-mezzanine-dtbs := monaco-ac-evk.dtb monaco-evk-ifp-mezzanine.dtbo -dtb-$(CONFIG_ARCH_QCOM) += monaco-ac-evk-ifp-mezzanine.dtb - monaco-evk-ifp-mezzanine-dtbs := monaco-evk.dtb monaco-evk-ifp-mezzanine.dtbo dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-ifp-mezzanine.dtb diff --git a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts deleted file mode 100644 index 6405d1e1939b1..0000000000000 --- a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. - */ - -/dts-v1/; - -#include "monaco-evk-common.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. Monaco-ac EVK"; - compatible = "qcom,monaco-ac-evk", "qcom,qcs8300"; -}; - -&apps_rsc { - regulators-0 { - vreg_s4a: smps4 { - regulator-name = "vreg_s4a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_s9a: smps9 { - regulator-name = "vreg_s9a"; - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - regulator-initial-mode = ; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-common.dtsi b/arch/arm64/boot/dts/qcom/monaco-evk-common.dtsi deleted file mode 100644 index fb0fd580509d8..0000000000000 --- a/arch/arm64/boot/dts/qcom/monaco-evk-common.dtsi +++ /dev/null @@ -1,1068 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. - */ - -#include -#include -#include -#include - -#include "monaco.dtsi" -#include "monaco-pmics.dtsi" - -/ { - aliases { - ethernet0 = ðernet0; - i2c1 = &i2c1; - serial0 = &uart7; - serial2 = &uart6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector-1 { - compatible = "usb-c-connector"; - label = "USB1-Type-C"; - data-role = "host"; - power-role = "source"; - - vbus-supply = <&usb1_vbus>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb1_con_hs_ep: endpoint { - remote-endpoint = <&usb_hub_2_1>; - }; - }; - - port@1 { - reg = <1>; - - usb1_con_ss_ep: endpoint { - remote-endpoint = <&hd3ss3220_1_in_ep>; - }; - - }; - }; - }; - - connector-2 { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - - id-gpios = <&pmm8620au_0_gpios 9 GPIO_ACTIVE_HIGH>; - vbus-gpios = <&expander6 7 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb2_vbus>; - - pinctrl-0 = <&usb2_id>; - pinctrl-names = "default"; - - port { - usb2_con_hs_ep: endpoint { - remote-endpoint = <&usb_2_dwc3_hs>; - }; - }; - }; - - dmic: audio-codec-0 { - compatible = "dmic-codec"; - #sound-dai-cells = <0>; - num-channels = <1>; - }; - - max98357a: audio-codec-1 { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - }; - - dp-connector-0 { - compatible = "dp-connector"; - label = "DP0"; - type = "mini"; - - port { - dp0_connector_in: endpoint { - remote-endpoint = <<8713sx_dp0_out>; - }; - }; - }; - - dp-connector-1 { - compatible = "dp-connector"; - label = "DP1"; - type = "mini"; - - port { - dp1_connector_in: endpoint { - remote-endpoint = <<8713sx_dp1_out>; - }; - }; - }; - - usb1_vbus: regulator-usb1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb1_vbus"; - gpio = <&expander1 3 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - }; - - usb2_vbus: regulator-usb2-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb2_vbus"; - gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - }; - - sound { - compatible = "qcom,qcs8275-sndcard"; - model = "MONACO-EVK"; - - pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>; - pinctrl-names = "default"; - - hs0-mi2s-playback-dai-link { - link-name = "HS0 MI2S Playback"; - - codec { - sound-dai = <&max98357a>; - }; - - cpu { - sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - - sec-mi2s-capture-dai-link { - link-name = "Secondary MI2S Capture"; - - codec { - sound-dai = <&dmic>; - }; - - cpu { - sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>; - }; - - platform { - sound-dai = <&q6apm>; - }; - }; - }; - - vreg_cam0_2p8: vreg-cam0-2p8 { - compatible = "regulator-fixed"; - regulator-name = "vreg_cam0_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - startup-delay-us = <10000>; - - gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&cam0_avdd_2v8_en_default>; - pinctrl-names = "default"; - }; - - vreg_cam1_2p8: vreg-cam1-2p8 { - compatible = "regulator-fixed"; - regulator-name = "vreg_cam1_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - startup-delay-us = <10000>; - - gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&cam1_avdd_2v8_en_default>; - pinctrl-names = "default"; - }; - - vreg_cam2_2p8: vreg-cam2-2p8 { - compatible = "regulator-fixed"; - regulator-name = "vreg_cam2_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - startup-delay-us = <10000>; - - gpio = <&tlmm 75 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-0 = <&cam2_avdd_2v8_en_default>; - pinctrl-names = "default"; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_l3a: ldo3 { - regulator-name = "vreg_l3a"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l4a: ldo4 { - regulator-name = "vreg_l4a"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l6a: ldo6 { - regulator-name = "vreg_l6a"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l8a: ldo8 { - regulator-name = "vreg_l8a"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l9a: ldo9 { - regulator-name = "vreg_l9a"; - regulator-min-microvolt = <2970000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - }; - - regulators-1 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s5c: smps5 { - regulator-name = "vreg_s5c"; - regulator-min-microvolt = <1104000>; - regulator-max-microvolt = <1104000>; - regulator-initial-mode = ; - }; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <512000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <904000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l8c: ldo8 { - regulator-name = "vreg_l8c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l9c: ldo9 { - regulator-name = "vreg_l9c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - }; -}; - -ðernet0 { - phy-mode = "2500base-x"; - phy-handle = <&hsgmii_phy0>; - - pinctrl-0 = <ðernet0_default>; - pinctrl-names = "default"; - - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - nvmem-cells = <&mac_addr0>; - nvmem-cell-names = "mac-address"; - - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - hsgmii_phy0: ethernet-phy@1c { - compatible = "ethernet-phy-id004d.d101"; - reg = <0x1c>; - reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <4>; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; -}; - -&gpi_dma0 { - status = "okay"; -}; - -&gpi_dma1 { - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/qcs8300/a623_zap.mbn"; -}; - -&i2c0 { - status = "okay"; - - bridge@4f { - compatible = "lontium,lt8713sx"; - reg = <0x4f>; - reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lt8713sx_dp_in: endpoint { - remote-endpoint = <&mdss_dp0_out>; - }; - }; - - port@1 { - reg = <1>; - - lt8713sx_dp0_out: endpoint { - remote-endpoint = <&dp0_connector_in>; - }; - }; - - port@2 { - reg = <2>; - - lt8713sx_dp1_out: endpoint { - remote-endpoint = <&dp1_connector_in>; - }; - }; - }; - }; - - usb-typec@47 { - compatible = "ti,hd3ss3220"; - reg = <0x47>; - - interrupts-extended = <&tlmm 45 IRQ_TYPE_EDGE_FALLING>; - - id-gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&usb1_id>, <&usb1_intr>; - pinctrl-names = "default"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - hd3ss3220_1_in_ep: endpoint { - remote-endpoint = <&usb1_con_ss_ep>; - }; - }; - - port@1 { - reg = <1>; - - hd3ss3220_1_out_ep: endpoint { - remote-endpoint = <&usb_hub_3_1>; - }; - }; - }; - }; -}; - -&i2c1 { - pinctrl-0 = <&qup_i2c1_default>; - pinctrl-names = "default"; - - status = "okay"; - - fan_controller: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #pwm-cells = <2>; - - fan { - pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; - }; - }; - - eeprom0: eeprom@50 { - compatible = "atmel,24c256"; - reg = <0x50>; - pagesize = <64>; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - mac_addr0: mac-addr@0 { - reg = <0x0 0x6>; - }; - }; - }; -}; - -&i2c15 { - pinctrl-0 = <&qup_i2c15_default>; - pinctrl-names = "default"; - - status = "okay"; - - expander0: gpio@38 { - compatible = "ti,tca9538"; - reg = <0x38>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander0_int>; - pinctrl-names = "default"; - }; - - expander1: gpio@39 { - compatible = "ti,tca9538"; - reg = <0x39>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander1_int>; - pinctrl-names = "default"; - }; - - expander2: gpio@3a { - compatible = "ti,tca9538"; - reg = <0x3a>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander2_int>; - pinctrl-names = "default"; - }; - - expander3: gpio@3b { - compatible = "ti,tca9538"; - reg = <0x3b>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander3_int>; - pinctrl-names = "default"; - }; - - expander4: gpio@3c { - compatible = "ti,tca9538"; - reg = <0x3c>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander4_int>; - pinctrl-names = "default"; - }; - - expander5: gpio@3d { - compatible = "ti,tca9538"; - reg = <0x3d>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander5_int>; - pinctrl-names = "default"; - - usb1_ss_sel_switch_hog: usb1-ss-sel-switch-hog { - gpio-hog; - gpios = <5 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; - - expander6: gpio@3e { - compatible = "ti,tca9538"; - reg = <0x3e>; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&expander6_int>; - pinctrl-names = "default"; - }; -}; - -&iris { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dp0 { - pinctrl-0 = <&dp_hot_plug_det>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&mdss_dp0_out { - data-lanes = <0 1 2 3>; - link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; - remote-endpoint = <<8713sx_dp_in>; -}; - -&mdss_dp0_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l4a>; - - status = "okay"; -}; - -&pcie0 { - pinctrl-0 = <&pcie0_default_state>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie0_phy { - vdda-phy-supply = <&vreg_l6a>; - vdda-pll-supply = <&vreg_l5a>; - vdda-qref-supply = <&vreg_l4a>; - vdda-refgen-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&pcie1 { - pinctrl-0 = <&pcie1_default_state>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pcie1_phy { - vdda-phy-supply = <&vreg_l6a>; - vdda-pll-supply = <&vreg_l5a>; - vdda-qref-supply = <&vreg_l4a>; - vdda-refgen-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&pcieport0 { - reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; -}; - -&pcieport1 { - reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; -}; - -&pmm8620au_0_gpios { - usb2_id: usb2-id-state { - pins = "gpio9"; - function = "normal"; - input-enable; - bias-pull-up; - power-source = <0>; - }; -}; - -&qup_i2c0_data_clk { - drive-strength = <2>; - bias-pull-up; -}; - -&qupv3_id_0 { - firmware-name = "qcom/qcs8300/qupv3fw.elf"; - status = "okay"; -}; - -&qupv3_id_1 { - firmware-name = "qcom/qcs8300/qupv3fw.elf"; - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/qcs8300/adsp.mbn"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/qcs8300/cdsp0.mbn"; - - status = "okay"; -}; - -&remoteproc_gpdsp { - firmware-name = "qcom/qcs8300/gpdsp0.mbn"; - - status = "okay"; -}; - -&serdes0 { - phy-supply = <&vreg_l4a>; - - status = "okay"; -}; - -&spi10 { - status = "okay"; - - tpm@0 { - compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; - reg = <0>; - spi-max-frequency = <20000000>; - }; -}; - -&tlmm { - pcie0_default_state: pcie0-default-state { - wake-pins { - pins = "gpio0"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - clkreq-pins { - pins = "gpio1"; - function = "pcie0_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - ethernet0_default: ethernet0-default-state { - ethernet0_mdc: ethernet0-mdc-pins { - pins = "gpio5"; - function = "emac0_mdc"; - drive-strength = <16>; - bias-pull-up; - }; - - ethernet0_mdio: ethernet0-mdio-pins { - pins = "gpio6"; - function = "emac0_mdio"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - expander5_int: expander5-int-state { - pins = "gpio3"; - function = "gpio"; - bias-pull-up; - }; - - usb1_hub_reset_hog: usb1-hub-reset-hog { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-high; - }; - - usb1_id: usb1-id-state { - pins = "gpio13"; - function = "gpio"; - bias-pull-up; - }; - - usb1_hs_sel_switch_hog: usb1-hs-sel-switch-hog { - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-high; - }; - - expander1_int: expander1-int-state { - pins = "gpio16"; - function = "gpio"; - bias-pull-up; - }; - - qup_i2c1_default: qup-i2c1-state { - pins = "gpio19", "gpio20"; - function = "qup0_se1"; - drive-strength = <2>; - bias-pull-up; - }; - - pcie1_default_state: pcie1-default-state { - wake-pins { - pins = "gpio21"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - clkreq-pins { - pins = "gpio22"; - function = "pcie1_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - perst-pins { - pins = "gpio23"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - expander3_int: expander3-int-state { - pins = "gpio24"; - function = "gpio"; - bias-pull-up; - }; - - usb1_intr: usb1-intr-state { - pins = "gpio45"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; - - expander6_int: expander6-int-state { - pins = "gpio52"; - function = "gpio"; - bias-pull-up; - }; - - expander0_int: expander0-int-state { - pins = "gpio56"; - function = "gpio"; - bias-pull-up; - }; - - cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { - pins = "gpio73"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state { - pins = "gpio74"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state { - pins = "gpio75"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - qup_i2c15_default: qup-i2c15-state { - pins = "gpio91", "gpio92"; - function = "qup1_se7"; - drive-strength = <2>; - bias-pull-up; - }; - - expander2_int: expander2-int-state { - pins = "gpio95"; - function = "gpio"; - bias-pull-up; - }; - - expander4_int: expander4-int-state { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; - }; -}; - -&uart6 { - status = "okay"; -}; - -&uart7 { - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l8a>; - vcc-max-microamp = <1100000>; - vccq-supply = <&vreg_l4c>; - vccq-max-microamp = <1200000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l4a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&usb_1 { - dr_mode = "host"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - usb_hub_2_x: hub@1 { - compatible = "usb5e3,610"; - reg = <1>; - - peer-hub = <&usb_hub_3_x>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - usb_hub_2_1: endpoint { - remote-endpoint = <&usb1_con_hs_ep>; - }; - }; - - /* - * Port-4 is connected to M.2 E key connector on corekit. - */ - port@4 { - reg = <4>; - - usb_hub_2_4: endpoint { - }; - }; - }; - }; - - usb_hub_3_x: hub@2 { - compatible = "usb5e3,625"; - reg = <2>; - - peer-hub = <&usb_hub_2_x>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - usb_hub_3_1: endpoint { - remote-endpoint = <&hd3ss3220_1_out_ep>; - }; - }; - - port@4 { - reg = <4>; - - usb_hub_3_4: endpoint { - }; - }; - }; - }; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l7c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_qmpphy { - vdda-phy-supply = <&vreg_l7a>; - vdda-pll-supply = <&vreg_l5a>; - - status = "okay"; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3_hs { - remote-endpoint = <&usb2_con_hs_ep>; -}; - -&usb_2_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l7c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index 286b68ef0ef8b..40547af1bc3a2 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -5,14 +5,78 @@ /dts-v1/; -#include "monaco-evk-common.dtsi" +#include +#include +#include +#include + +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. Monaco EVK"; compatible = "qcom,monaco-evk", "qcom,qcs8300"; aliases { + ethernet0 = ðernet0; + i2c1 = &i2c1; + serial0 = &uart7; serial1 = &uart2; + serial2 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector-1 { + compatible = "usb-c-connector"; + label = "USB1-Type-C"; + data-role = "host"; + power-role = "source"; + + vbus-supply = <&usb1_vbus>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb1_con_hs_ep: endpoint { + remote-endpoint = <&usb_hub_2_1>; + }; + }; + + port@1 { + reg = <1>; + + usb1_con_ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_1_in_ep>; + }; + + }; + }; + }; + + connector-2 { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + id-gpios = <&pmm8620au_0_gpios 9 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&expander6 7 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb2_vbus>; + + pinctrl-0 = <&usb2_id>; + pinctrl-names = "default"; + + port { + usb2_con_hs_ep: endpoint { + remote-endpoint = <&usb_2_dwc3_hs>; + }; + }; }; cpus { @@ -60,6 +124,141 @@ }; }; + dmic: audio-codec-0 { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + num-channels = <1>; + }; + + max98357a: audio-codec-1 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + }; + + dp-connector-0 { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <<8713sx_dp0_out>; + }; + }; + }; + + dp-connector-1 { + compatible = "dp-connector"; + label = "DP1"; + type = "mini"; + + port { + dp1_connector_in: endpoint { + remote-endpoint = <<8713sx_dp1_out>; + }; + }; + }; + + usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + gpio = <&expander1 3 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "qcom,qcs8275-sndcard"; + model = "MONACO-EVK"; + + pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>; + pinctrl-names = "default"; + + hs0-mi2s-playback-dai-link { + link-name = "HS0 MI2S Playback"; + + codec { + sound-dai = <&max98357a>; + }; + + cpu { + sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + sec-mi2s-capture-dai-link { + link-name = "Secondary MI2S Capture"; + + codec { + sound-dai = <&dmic>; + }; + + cpu { + sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_cam0_2p8: vreg-cam0-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam0_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam0_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam1_2p8: vreg-cam1-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam1_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam2_2p8: vreg-cam2-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam2_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam2_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + /* This comes from a PMIC handled within the SAIL domain */ vreg_s2s: vreg-s2s { compatible = "regulator-fixed"; @@ -93,7 +292,511 @@ }; }; +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s5c: smps5 { + regulator-name = "vreg_s5c"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = ; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <512000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +ðernet0 { + phy-mode = "2500base-x"; + phy-handle = <&hsgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + hsgmii_phy0: ethernet-phy@1c { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x1c>; + reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs8300/a623_zap.mbn"; +}; + +&i2c0 { + status = "okay"; + + bridge@4f { + compatible = "lontium,lt8713sx"; + reg = <0x4f>; + reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt8713sx_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8713sx_dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; + + port@2 { + reg = <2>; + + lt8713sx_dp1_out: endpoint { + remote-endpoint = <&dp1_connector_in>; + }; + }; + }; + }; + + usb-typec@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + + interrupts-extended = <&tlmm 45 IRQ_TYPE_EDGE_FALLING>; + + id-gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb1_id>, <&usb1_intr>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hd3ss3220_1_in_ep: endpoint { + remote-endpoint = <&usb1_con_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + hd3ss3220_1_out_ep: endpoint { + remote-endpoint = <&usb_hub_3_1>; + }; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + eeprom0: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_addr0: mac-addr@0 { + reg = <0x0 0x6>; + }; + }; + }; +}; + +&i2c15 { + pinctrl-0 = <&qup_i2c15_default>; + pinctrl-names = "default"; + + status = "okay"; + + expander0: gpio@38 { + compatible = "ti,tca9538"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander0_int>; + pinctrl-names = "default"; + }; + + expander1: gpio@39 { + compatible = "ti,tca9538"; + reg = <0x39>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander1_int>; + pinctrl-names = "default"; + }; + + expander2: gpio@3a { + compatible = "ti,tca9538"; + reg = <0x3a>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander2_int>; + pinctrl-names = "default"; + }; + + expander3: gpio@3b { + compatible = "ti,tca9538"; + reg = <0x3b>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander3_int>; + pinctrl-names = "default"; + }; + + expander4: gpio@3c { + compatible = "ti,tca9538"; + reg = <0x3c>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander4_int>; + pinctrl-names = "default"; + }; + + expander5: gpio@3d { + compatible = "ti,tca9538"; + reg = <0x3d>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander5_int>; + pinctrl-names = "default"; + + usb1_ss_sel_switch_hog: usb1-ss-sel-switch-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-high; + }; + }; + + expander6: gpio@3e { + compatible = "ti,tca9538"; + reg = <0x3e>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander6_int>; + pinctrl-names = "default"; + }; +}; + +&iris { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <<8713sx_dp_in>; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + vdda-qref-supply = <&vreg_l4a>; + vdda-refgen-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + vdda-qref-supply = <&vreg_l4a>; + vdda-refgen-supply = <&vreg_l7a>; + + status = "okay"; +}; + &pcieport0 { + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + port { pcieport0_ep: endpoint { remote-endpoint = <&m2_e_pcie_ep>; @@ -101,6 +804,54 @@ }; }; +&pcieport1 { + reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; +}; + +&pmm8620au_0_gpios { + usb2_id: usb2-id-state { + pins = "gpio9"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + +&qup_i2c0_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8300/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8300/cdsp0.mbn"; + + status = "okay"; +}; + +&remoteproc_gpdsp { + firmware-name = "qcom/qcs8300/gpdsp0.mbn"; + + status = "okay"; +}; + &sdhc_1 { vmmc-supply = <&vreg_l8a>; vqmmc-supply = <&vreg_s2s>; @@ -112,6 +863,188 @@ status = "okay"; }; +&serdes0 { + phy-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&spi10 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&tlmm { + pcie0_default_state: pcie0-default-state { + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio5"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio6"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + expander5_int: expander5-int-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + usb1_hub_reset_hog: usb1-hub-reset-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-high; + }; + + usb1_id: usb1-id-state { + pins = "gpio13"; + function = "gpio"; + bias-pull-up; + }; + + usb1_hs_sel_switch_hog: usb1-hs-sel-switch-hog { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + }; + + expander1_int: expander1-int-state { + pins = "gpio16"; + function = "gpio"; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-state { + pins = "gpio19", "gpio20"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_default_state: pcie1-default-state { + wake-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio22"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + expander3_int: expander3-int-state { + pins = "gpio24"; + function = "gpio"; + bias-pull-up; + }; + + usb1_intr: usb1-intr-state { + pins = "gpio45"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + expander6_int: expander6-int-state { + pins = "gpio52"; + function = "gpio"; + bias-pull-up; + }; + + expander0_int: expander0-int-state { + pins = "gpio56"; + function = "gpio"; + bias-pull-up; + }; + + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-state { + pins = "gpio91", "gpio92"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + expander2_int: expander2-int-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + }; + + expander4_int: expander4-int-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + }; +}; + &uart2 { status = "okay"; @@ -125,3 +1058,125 @@ &system_pd { domain-idle-states = <&system_sleep>, <&system_suspend>; }; + +&uart6 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + usb_hub_2_x: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + + peer-hub = <&usb_hub_3_x>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_2_1: endpoint { + remote-endpoint = <&usb1_con_hs_ep>; + }; + }; + + /* + * Port-4 is connected to M.2 E key connector on corekit. + */ + port@4 { + reg = <4>; + + usb_hub_2_4: endpoint { + }; + }; + }; + }; + + usb_hub_3_x: hub@2 { + compatible = "usb5e3,625"; + reg = <2>; + + peer-hub = <&usb_hub_2_x>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_3_1: endpoint { + remote-endpoint = <&hd3ss3220_1_out_ep>; + }; + }; + + port@4 { + reg = <4>; + + usb_hub_3_4: endpoint { + }; + }; + }; + }; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3_hs { + remote-endpoint = <&usb2_con_hs_ep>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; From f76d560d141999dbf481246e12c0f595968e1bb5 Mon Sep 17 00:00:00 2001 From: Umang Chheda Date: Fri, 26 Jun 2026 16:43:00 +0530 Subject: [PATCH 2/4] UPSTREAM: arm64: dts: qcom: monaco: Add monaco-ac EVK board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add initial device tree support for monaco-ac EVK board, based on Qualcomm's monaco-ac (QCS8300-AC) variant SoC. monaco-ac EVK is single board supporting these peripherals : - Storage: 1 × 128 GB UFS, micro-SD card, EEPROMs for MACs, and eMMC. - Audio/Video, Camera & Display ports. - Connectivity: RJ45 2.5GbE, WLAN/Bluetooth, CAN/CAN-FD. - PCIe ports. - USB & UART ports. Compared to "monaco-evk" variant, which utilizes higher tier QCS8300-AA SKU (supporting 40 TOPS of NPU) and a 4-PMIC (2x PM8650AU + Maxim MAX20018 + TI TPS6594) power delivery network (PDN) to support higher power requirement. This board utilizes lower tier QCS8300-AC SKU (Supporting 20 TOPS of NPU) and a simplified 2 PMIC(2x PM8650AU) PDN. Add support for the following components : - GPI (Generic Peripheral Interface) and QUPv3-0/1 controllers to facilitate DMA and peripheral communication. - TCA9534 I/O expander via I2C to provide 8 additional GPIO lines for extended I/O functionality. - USB1 controller routed to a TypeC connector in device mode to support USB peripheral operations. - Remoteproc subsystems for supported DSPs such as Audio DSP, Compute DSP and Generic DSP, along with their corresponding firmware. - Configure nvmem-layout on the I2C EEPROM to store data for Ethernet and other consumers. - QCA8081 2.5G Ethernet PHY on port-0 and expose the Ethernet MAC address via nvmem for network configuration. It depends on CONFIG_QCA808X_PHY to use QCA8081 PHY. - Support for the Iris video decoder, including the required firmware, to enable video decoding capabilities. - PCIe0 and PCIe1 controller and phy-nodes. - Sound card and max98357a based I2S speaker amplifier. Written with inputs from: Nirmesh Kumar Singh - GPIO Expander. Viken Dadhaniya - GPI/QUP. Mohd Ayaan Anwar - Ethernet. Monish Chunara - EEPROM. Swati Agarwal - USB. Sushrut Shree Trivedi - PCIe. Mohammad Rafi Shaik - Audio. Link: https://lore.kernel.org/all/20260626111301.3479559-3-umang.chheda@oss.qualcomm.com/ Co-developed-by: Faruque Ansari Signed-off-by: Umang Chheda Reviewed-by: Avaneesh Kumar Dwivedi Reviewed-by: Konrad Dybcio Signed-off-by: Faruque Ansari --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/monaco-ac-evk.dts | 938 +++++++++++++++++++++ 2 files changed, 939 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/monaco-ac-evk.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0613910d74cb1..6eb7da670bd15 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-raspberrypi-dsi-7inch.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-ifp-mezzanine.dtbo dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza.dtb +dtb-$(CONFIG_ARCH_QCOM) += monaco-ac-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb monaco-arduino-monza-el2-dtbs := monaco-arduino-monza.dtb monaco-el2.dtbo diff --git a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts new file mode 100644 index 0000000000000..6f3c3ffefe340 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts @@ -0,0 +1,938 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include +#include +#include +#include + +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Monaco-ac EVK"; + compatible = "qcom,monaco-evk", "qcom,qcs8300"; + + aliases { + ethernet0 = ðernet0; + i2c1 = &i2c1; + serial0 = &uart7; + serial2 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector-2 { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + id-gpios = <&pmm8620au_0_gpios 9 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&expander6 7 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb2_vbus>; + + pinctrl-0 = <&usb2_id>; + pinctrl-names = "default"; + + port { + usb2_con_hs_ep: endpoint { + remote-endpoint = <&usb_2_dwc3_hs>; + }; + }; + }; + + dmic: audio-codec-0 { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + num-channels = <1>; + }; + + max98357a: audio-codec-1 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + }; + + dp-connector-0 { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <<8713sx_dp0_out>; + }; + }; + }; + + dp-connector-1 { + compatible = "dp-connector"; + label = "DP1"; + type = "mini"; + + port { + dp1_connector_in: endpoint { + remote-endpoint = <<8713sx_dp1_out>; + }; + }; + }; + + usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + gpio = <&pmm8650au_1_gpios 7 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "qcom,qcs8275-sndcard"; + model = "MONACO-EVK"; + + pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>; + pinctrl-names = "default"; + + hs0-mi2s-playback-dai-link { + link-name = "HS0 MI2S Playback"; + + codec { + sound-dai = <&max98357a>; + }; + + cpu { + sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + sec-mi2s-capture-dai-link { + link-name = "Secondary MI2S Capture"; + + codec { + sound-dai = <&dmic>; + }; + + cpu { + sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + vreg_cam0_2p8: vreg-cam0-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam0_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam0_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam1_2p8: vreg-cam1-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam1_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + vreg_cam2_2p8: vreg-cam2-2p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam2_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <10000>; + + gpio = <&tlmm 75 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&cam2_avdd_2v8_en_default>; + pinctrl-names = "default"; + }; + + /* This comes from a PMIC handled within the SAIL domain */ + vreg_s2s: vreg-s2s { + compatible = "regulator-fixed"; + regulator-name = "vreg_s2s"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s5c: smps5 { + regulator-name = "vreg_s5c"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = ; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <512000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +ðernet0 { + phy-mode = "2500base-x"; + phy-handle = <&hsgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + hsgmii_phy0: ethernet-phy@1c { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x1c>; + reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs8300/a623_zap.mbn"; +}; + +&i2c0 { + status = "okay"; + + bridge@4f { + compatible = "lontium,lt8713sx"; + reg = <0x4f>; + reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt8713sx_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8713sx_dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; + + port@2 { + reg = <2>; + + lt8713sx_dp1_out: endpoint { + remote-endpoint = <&dp1_connector_in>; + }; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + eeprom0: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mac_addr0: mac-addr@0 { + reg = <0x0 0x6>; + }; + }; + }; +}; + +&i2c15 { + pinctrl-0 = <&qup_i2c15_default>; + pinctrl-names = "default"; + + status = "okay"; + + expander0: gpio@38 { + compatible = "ti,tca9538"; + reg = <0x38>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 56 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander0_int>; + pinctrl-names = "default"; + }; + + expander1: gpio@39 { + compatible = "ti,tca9538"; + reg = <0x39>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 16 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander1_int>; + pinctrl-names = "default"; + }; + + expander2: gpio@3a { + compatible = "ti,tca9538"; + reg = <0x3a>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 95 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander2_int>; + pinctrl-names = "default"; + }; + + expander3: gpio@3b { + compatible = "ti,tca9538"; + reg = <0x3b>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander3_int>; + pinctrl-names = "default"; + }; + + expander4: gpio@3c { + compatible = "ti,tca9538"; + reg = <0x3c>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 96 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander4_int>; + pinctrl-names = "default"; + }; + + expander5: gpio@3d { + compatible = "ti,tca9538"; + reg = <0x3d>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander5_int>; + pinctrl-names = "default"; + }; + + expander6: gpio@3e { + compatible = "ti,tca9538"; + reg = <0x3e>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts-extended = <&tlmm 52 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&expander6_int>; + pinctrl-names = "default"; + }; +}; + +&iris { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <<8713sx_dp_in>; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcieport0 { + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; +}; + +&pcieport1 { + reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; +}; + +&pmm8620au_0_gpios { + usb2_id: usb2-id-state { + pins = "gpio9"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + +&qup_i2c0_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs8300/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs8300/cdsp0.mbn"; + + status = "okay"; +}; + +&remoteproc_gpdsp { + firmware-name = "qcom/qcs8300/gpdsp0.mbn"; + + status = "okay"; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l8a>; + vqmmc-supply = <&vreg_s2s>; + + no-sd; + no-sdio; + non-removable; + + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&spi10 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&tlmm { + pcie0_default_state: pcie0-default-state { + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio5"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio6"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + expander5_int: expander5-int-state { + pins = "gpio3"; + function = "gpio"; + bias-pull-up; + }; + + expander1_int: expander1-int-state { + pins = "gpio16"; + function = "gpio"; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-state { + pins = "gpio19", "gpio20"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_default_state: pcie1-default-state { + wake-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio22"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + expander3_int: expander3-int-state { + pins = "gpio24"; + function = "gpio"; + bias-pull-up; + }; + + expander6_int: expander6-int-state { + pins = "gpio52"; + function = "gpio"; + bias-pull-up; + }; + + expander0_int: expander0-int-state { + pins = "gpio56"; + function = "gpio"; + bias-pull-up; + }; + + cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam1_avdd_2v8_en_default: cam1-avdd-2v8-en-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam2_avdd_2v8_en_default: cam2-avdd-2v8-en-state { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-state { + pins = "gpio91", "gpio92"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + expander2_int: expander2-int-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + }; + + expander4_int: expander4-int-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_1 { + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3_hs { + remote-endpoint = <&usb2_con_hs_ep>; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; From 1a6e0851995152b506fd0a6165d9e71deb6c7683 Mon Sep 17 00:00:00 2001 From: Umang Chheda Date: Fri, 26 Jun 2026 16:43:01 +0530 Subject: [PATCH 3/4] UPSTREAM: arm64: dts: qcom: monaco-ac-evk: Add IFP mezzanine monaco-ac-evk board supports monaco-evk-ifp-mezzanine attach. Add combined DTB for the same by merging monaco-ac-evk.dtb with monaco-evk-ifp-mezzanine overlay. Link: https://lore.kernel.org/all/20260626111301.3479559-4-umang.chheda@oss.qualcomm.com/ Signed-off-by: Umang Chheda Reviewed-by: Konrad Dybcio Signed-off-by: Faruque Ansari --- arch/arm64/boot/dts/qcom/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6eb7da670bd15..de0bc5dbb4f5e 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -90,6 +90,9 @@ dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza-camx-el2.dtbo monaco-evk-el2-dtbs := monaco-evk.dtb monaco-el2.dtbo +monaco-ac-evk-ifp-mezzanine-dtbs := monaco-ac-evk.dtb monaco-evk-ifp-mezzanine.dtbo +dtb-$(CONFIG_ARCH_QCOM) += monaco-ac-evk-ifp-mezzanine.dtb + dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-el2.dtb monaco-evk-camera-imx577-dtbs := monaco-evk.dtb monaco-evk-camera-imx577.dtbo From a295118d0d5ef6e7ea66307f8019a38570778973 Mon Sep 17 00:00:00 2001 From: Wei Deng Date: Fri, 16 Oct 2026 14:03:29 +0530 Subject: [PATCH 4/4] FROMLIST: arm64: dts: qcom: monaco-ac-evk: Describe the PCIe M.2 Key E connector The Monaco AC EVK has a PCIe M.2 Mechanical Key E connector to connect wireless connectivity cards over PCIe and UART interfaces. Hence, describe the connector node and link it with the PCIe 0 Root Port and UART2 nodes through graph port/endpoint. The port/endpoint nodes are defined inline in the board file rather than as empty anchor nodes in the SoC DTSI, so that of_graph_is_present() only returns true for boards that have an M.2 Key E connector present, preventing unintended pwrseq probe on boards with soldered wireless chips (e.g. qcs8300-ride). The connector's 3.3V supply is described as a fixed always-on regulator (vreg_wcn_3p3), which is required by the pcie-m2-e-connector binding. Also add the serial1 = &uart2 alias, which is required for the Bluetooth serdev device to be enumerated on the UART2 interface. Link: https://lore.kernel.org/all/20261021104709.1428234-1-wei.deng@oss.qualcomm.com/ Signed-off-by: Wei Deng --- arch/arm64/boot/dts/qcom/monaco-ac-evk.dts | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts index 6f3c3ffefe340..3780642fe4833 100644 --- a/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-ac-evk.dts @@ -21,6 +21,7 @@ ethernet0 = ðernet0; i2c1 = &i2c1; serial0 = &uart7; + serial1 = &uart2; serial2 = &uart6; }; @@ -47,6 +48,38 @@ }; }; + connector-3 { + compatible = "pcie-m2-e-connector"; + vpcie3v3-supply = <&vreg_wcn_3p3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + m2_e_pcie_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&pcieport0_ep>; + }; + }; + + port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + m2_e_uart_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&uart2_ep>; + }; + }; + }; + }; + dmic: audio-codec-0 { compatible = "dmic-codec"; #sound-dai-cells = <0>; @@ -91,6 +124,17 @@ enable-active-high; }; + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + }; + sound { compatible = "qcom,qcs8275-sndcard"; model = "MONACO-EVK"; @@ -657,6 +701,12 @@ &pcieport0 { reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + port { + pcieport0_ep: endpoint { + remote-endpoint = <&m2_e_pcie_ep>; + }; + }; }; &pcieport1 { @@ -875,6 +925,16 @@ }; }; +&uart2 { + status = "okay"; + + port { + uart2_ep: endpoint { + remote-endpoint = <&m2_e_uart_ep>; + }; + }; +}; + &uart6 { status = "okay"; };