diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6577a1c826bc5..93619b2304239 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -478,13 +478,18 @@ hamoa-camx-el2-dtbs := hamoa-iot-evk-el2.dtb hamoa-evk-camx.dtbo hamoa-camx-el2 dtb-$(CONFIG_ARCH_QCOM) += hamoa-camx-el2.dtb lemans-evk-camx-dtbs := lemans-evk.dtb lemans-evk-camx.dtbo +lemans-draco-evk-camx-dtbs := lemans-draco-evk.dtb lemans-draco-evk-camx.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camx.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camx.dtbo +dtb-$(CONFIG_ARCH_QCOM) += lemans-draco-evk-camx.dtb +dtb-$(CONFIG_ARCH_QCOM) += lemans-draco-evk-camx.dtbo lemans-camx-el2-dtbs := lemans-evk-el2.dtb lemans-evk-camx.dtbo lemans-camx-el2.dtbo +lemans-draco-evk-camx-el2-dtbs := lemans-draco-evk-el2.dtb lemans-draco-evk-camx.dtbo lemans-camx-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-camx-el2.dtb +dtb-$(CONFIG_ARCH_QCOM) += lemans-draco-evk-camx-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-staging.dtbo diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-evk-camera-sensor.dtsi b/arch/arm64/boot/dts/qcom/lemans-draco-evk-camera-sensor.dtsi new file mode 100644 index 0000000000000..da032e37b7541 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-draco-evk-camera-sensor.dtsi @@ -0,0 +1,1278 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include +#include + +&cam_cci0 { + /* GMSL deserializer 0 */ + qcom,cam-gmsl-deserializer0 { + csiphy-sd-index = <0>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-0 = <&cam_sensor_mclk0_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend>; + pinctrl-names = "cam_default", "cam_suspend"; + gpios = <&pmm8654au_0_gpios 7 0>, <&expander0 0 0>, <&expander0 1 0>; + gpio-reset = <0>; + gpio-custom1 = <1>; + gpio-custom2 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <0 0 0>; + gpio-req-tbl-label = "CAM_RESET0", "CAM_CUSTOM1", "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + status = "okay"; + + port@0 { + reg = <0>; + + deser0_port0: endpoint { + remote-endpoint = <&gmsl_sensor0_ep>; + }; + }; + + port@1 { + reg = <1>; + + deser0_port1: endpoint { + remote-endpoint = <&gmsl_sensor1_ep>; + }; + }; + + port@2 { + reg = <2>; + + deser0_port2: endpoint { + remote-endpoint = <&gmsl_sensor2_ep>; + }; + }; + + port@3 { + reg = <3>; + + deser0_port3: endpoint { + remote-endpoint = <&gmsl_sensor3_ep>; + }; + }; + }; + + /* GMSL deserializer 0 sensor 0 */ + lm_slot0: qcom,cam-gmsl-sensor0 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <0>; + csiphy-sd-index = <0>; + + port { + gmsl_sensor0_ep: endpoint { + remote-endpoint = <&deser0_port0>; + }; + }; + }; + + /* GMSL deserializer 0 sensor 1 */ + lm_slot1: qcom,cam-gmsl-sensor1 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <1>; + csiphy-sd-index = <0>; + + port { + gmsl_sensor1_ep: endpoint { + remote-endpoint = <&deser0_port1>; + }; + }; + }; + + /* GMSL deserializer 0 sensor 2 */ + lm_slot2: qcom,cam-gmsl-sensor2 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <2>; + csiphy-sd-index = <0>; + + port { + gmsl_sensor2_ep: endpoint { + remote-endpoint = <&deser0_port2>; + }; + }; + }; + + /* GMSL deserializer 0 sensor 3 */ + lm_slot3: qcom,cam-gmsl-sensor3 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <3>; + csiphy-sd-index = <0>; + + port { + gmsl_sensor3_ep: endpoint { + remote-endpoint = <&deser0_port3>; + }; + }; + }; + + actuator_cam0: qcom,actuator0 { + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&vreg_s4a>; + regulator-names = "cam_vaf"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + cell-index = <16>; + status = "okay"; + }; + + /*EEPROM0: OV13B10*/ + eeprom_cam0: qcom,eeprom0 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend>; + gpios = <&tlmm 72 0>, + <&pmm8654au_0_gpios 7 0>, + <&expander0 1 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK0", + "CAMIF_RESET0", + "CAM_CUSTOM0"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <16>; + status = "okay"; + }; + + /*cam0: OV13B10*/ + lm_slot16: qcom,cam-sensor0 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam0>; + actuator-src = <&actuator_cam0>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend>; + gpios = <&tlmm 72 0>, + <&pmm8654au_0_gpios 7 0>, + <&expander0 1 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK0", + "CAMIF_RESET0", + "CAM_CUSTOM0"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <16>; + status = "okay"; + }; + + /*EEPROM0: IMX858*/ + eeprom_cam4: qcom,eeprom4 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend>; + gpios = <&tlmm 72 0>, + <&pmm8654au_0_gpios 7 0>, + <&expander0 1 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK0", + "CAMIF_RESET0", + "CAM_CUSTOM0"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <20>; + status = "okay"; + }; + + /*cam0: IMX858*/ + lm_slot20: qcom,cam-sensor4 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam4>; + actuator-src = <&actuator_cam0>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend>; + gpios = <&tlmm 72 0>, + <&pmm8654au_0_gpios 7 0>, + <&expander0 1 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK0", + "CAMIF_RESET0", + "CAM_CUSTOM0"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <20>; + status = "okay"; + }; + + /*cam0: IMX577 - 22pin connector*/ + lm_slot24: qcom,cam-sensor8 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend>; + gpios = <&tlmm 72 0>, + <&pmm8654au_0_gpios 7 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAM_MCLK0", + "CAMIF_RESET0"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <24>; + status = "okay"; + }; +}; + +&cam_cci1 { + /* GMSL deserializer 1 */ + qcom,cam-gmsl-deserializer1 { + csiphy-sd-index = <1>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-0 = <&cam_sensor_mclk1_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend>; + pinctrl-names = "cam_default", "cam_suspend"; + gpios = <&pmm8654au_0_gpios 8 0>, <&expander0 2 0>, <&expander0 3 0>; + gpio-reset = <0>; + gpio-custom1 = <1>; + gpio-custom2 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <0 0 0>; + gpio-req-tbl-label = "CAM_RESET1", "CAM_CUSTOM1", "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + status = "okay"; + + port@0 { + reg = <0>; + + deser1_port0: endpoint { + remote-endpoint = <&gmsl_sensor4_ep>; + }; + }; + + port@1 { + reg = <1>; + + deser1_port1: endpoint { + remote-endpoint = <&gmsl_sensor5_ep>; + }; + }; + + port@2 { + reg = <2>; + + deser1_port2: endpoint { + remote-endpoint = <&gmsl_sensor6_ep>; + }; + }; + + port@3 { + reg = <3>; + + deser1_port3: endpoint { + remote-endpoint = <&gmsl_sensor7_ep>; + }; + }; + }; + + /* GMSL deserializer 1 sensor 0 */ + lm_slot4: qcom,cam-gmsl-sensor4 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <4>; + csiphy-sd-index = <1>; + + port { + gmsl_sensor4_ep: endpoint { + remote-endpoint = <&deser1_port0>; + }; + }; + }; + + /* GMSL deserializer 1 sensor 1 */ + lm_slot5: qcom,cam-gmsl-sensor5 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <5>; + csiphy-sd-index = <1>; + + port { + gmsl_sensor5_ep: endpoint { + remote-endpoint = <&deser1_port1>; + }; + }; + }; + + /* GMSL deserializer 1 sensor 2 */ + lm_slot6: qcom,cam-gmsl-sensor6 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <6>; + csiphy-sd-index = <1>; + + port { + gmsl_sensor6_ep: endpoint { + remote-endpoint = <&deser1_port2>; + }; + }; + }; + + /* GMSL deserializer 1 sensor 3 */ + lm_slot7: qcom,cam-gmsl-sensor7 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <7>; + csiphy-sd-index = <1>; + + port { + gmsl_sensor7_ep: endpoint { + remote-endpoint = <&deser1_port3>; + }; + }; + }; + + actuator_cam1: qcom,actuator1 { + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&vreg_s4a>; + regulator-names = "cam_vaf"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + cell-index = <17>; + status = "okay"; + }; + + /*EEPROM1: OV13B10*/ + eeprom_cam1: qcom,eeprom1 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend>; + gpios = <&tlmm 73 0>, + <&pmm8654au_0_gpios 8 0>, + <&expander0 3 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK1", + "CAMIF_RESET1", + "CAM_CUSTOM1"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <17>; + status = "okay"; + }; + + /*cam1: OV13B10*/ + lm_slot17: qcom,cam-sensor1 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam1>; + actuator-src = <&actuator_cam1>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend>; + gpios = <&tlmm 73 0>, + <&pmm8654au_0_gpios 8 0>, + <&expander0 3 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK1", + "CAMIF_RESET1", + "CAM_CUSTOM1"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <17>; + status = "okay"; + }; + + /*EEPROM1: IMX858*/ + eeprom_cam5: qcom,eeprom5 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend>; + gpios = <&tlmm 73 0>, + <&pmm8654au_0_gpios 8 0>, + <&expander0 3 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK1", + "CAMIF_RESET1", + "CAM_CUSTOM1"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <21>; + status = "okay"; + }; + + /*cam1: IMX858*/ + lm_slot21: qcom,cam-sensor5 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam5>; + actuator-src = <&actuator_cam1>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend>; + gpios = <&tlmm 73 0>, + <&pmm8654au_0_gpios 8 0>, + <&expander0 3 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK1", + "CAMIF_RESET1", + "CAM_CUSTOM1"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <21>; + status = "okay"; + }; + + /*cam1: IMX577 - 22pin connector*/ + lm_slot25: qcom,cam-sensor9 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend>; + gpios = <&tlmm 73 0>, + <&pmm8654au_0_gpios 8 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAM_MCLK1", + "CAMIF_RESET1"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <25>; + status = "okay"; + }; +}; + +&cam_cci2 { + /* GMSL deserializer 2 */ + qcom,cam-gmsl-deserializer2 { + csiphy-sd-index = <2>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-0 = <&cam_sensor_mclk2_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend>; + pinctrl-names = "cam_default", "cam_suspend"; + gpios = <&pmm8654au_0_gpios 9 0>, <&expander0 4 0>, <&expander0 5 0>; + gpio-reset = <0>; + gpio-custom1 = <1>; + gpio-custom2 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <0 0 0>; + gpio-req-tbl-label = "CAM_RESET1", "CAM_CUSTOM1", "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + status = "okay"; + + port@0 { + reg = <0>; + + deser2_port0: endpoint { + remote-endpoint = <&gmsl_sensor8_ep>; + }; + }; + + port@1 { + reg = <1>; + + deser2_port1: endpoint { + remote-endpoint = <&gmsl_sensor9_ep>; + }; + }; + + port@2 { + reg = <2>; + + deser2_port2: endpoint { + remote-endpoint = <&gmsl_sensor10_ep>; + }; + }; + + port@3 { + reg = <3>; + + deser2_port3: endpoint { + remote-endpoint = <&gmsl_sensor11_ep>; + }; + }; + }; + + /* GMSL deserializer 2 sensor 0 */ + lm_slot8: qcom,cam-gmsl-sensor8 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <8>; + csiphy-sd-index = <2>; + + port { + gmsl_sensor8_ep: endpoint { + remote-endpoint = <&deser2_port0>; + }; + }; + }; + + /* GMSL deserializer 2 sensor 1 */ + lm_slot9: qcom,cam-gmsl-sensor9 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <9>; + csiphy-sd-index = <2>; + + port { + gmsl_sensor9_ep: endpoint { + remote-endpoint = <&deser2_port1>; + }; + }; + }; + + /* GMSL deserializer 2 sensor 2 */ + lm_slot10: qcom,cam-gmsl-sensor10 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <10>; + csiphy-sd-index = <2>; + + port { + gmsl_sensor10_ep: endpoint { + remote-endpoint = <&deser2_port2>; + }; + }; + }; + + /* GMSL deserializer 2 sensor 3 */ + lm_slot11: qcom,cam-gmsl-sensor11 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <11>; + csiphy-sd-index = <2>; + + port { + gmsl_sensor11_ep: endpoint { + remote-endpoint = <&deser2_port3>; + }; + }; + }; + + actuator_cam2: qcom,actuator2 { + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&vreg_s4a>; + regulator-names = "cam_vaf"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + cell-index = <18>; + status = "okay"; + }; + + /*EEPROM2: OV13B10*/ + eeprom_cam2: qcom,eeprom2 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend>; + gpios = <&tlmm 74 0>, + <&pmm8654au_0_gpios 9 0>, + <&expander0 5 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK2", + "CAMIF_RESET2", + "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <18>; + status = "okay"; + }; + + /*cam2: OV13B10*/ + lm_slot18: qcom,cam-sensor2 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam2>; + actuator-src = <&actuator_cam2>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend>; + gpios = <&tlmm 74 0>, + <&pmm8654au_0_gpios 9 0>, + <&expander0 5 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK2", + "CAMIF_RESET2", + "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <18>; + status = "okay"; + }; + + /*EEPROM2: IMX858*/ + eeprom_cam6: qcom,eeprom6 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend>; + gpios = <&tlmm 74 0>, + <&pmm8654au_0_gpios 9 0>, + <&expander0 5 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK2", + "CAMIF_RESET2", + "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <22>; + status = "okay"; + }; + + /*cam2: IMX858*/ + lm_slot22: qcom,cam-sensor6 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam6>; + actuator-src = <&actuator_cam2>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend>; + gpios = <&tlmm 74 0>, + <&pmm8654au_0_gpios 9 0>, + <&expander0 5 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK2", + "CAMIF_RESET2", + "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <22>; + status = "okay"; + }; + + /*cam2: IMX577 - 22pin connector*/ + lm_slot26: qcom,cam-sensor10 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend>; + gpios = <&tlmm 74 0>, + <&pmm8654au_0_gpios 9 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAM_MCLK2", + "CAMIF_RESET2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <26>; + status = "okay"; + }; +}; + +&cam_cci3 { + /* GMSL deserializer 3 */ + qcom,cam-gmsl-deserializer3 { + csiphy-sd-index = <3>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-0 = <&cam_sensor_mclk3_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend>; + pinctrl-names = "cam_default", "cam_suspend"; + gpios = <&pmm8654au_0_gpios 10 0>, <&expander0 6 0>, <&expander0 7 0>; + gpio-reset = <0>; + gpio-custom1 = <1>; + gpio-custom2 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <0 0 0>; + gpio-req-tbl-label = "CAM_RESET1", "CAM_CUSTOM1", "CAM_CUSTOM2"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + status = "okay"; + + port@0 { + reg = <0>; + + deser3_port0: endpoint { + remote-endpoint = <&gmsl_sensor12_ep>; + }; + }; + + port@1 { + reg = <1>; + + deser3_port1: endpoint { + remote-endpoint = <&gmsl_sensor13_ep>; + }; + }; + + port@2 { + reg = <2>; + + deser3_port2: endpoint { + remote-endpoint = <&gmsl_sensor14_ep>; + }; + }; + + port@3 { + reg = <3>; + + deser3_port3: endpoint { + remote-endpoint = <&gmsl_sensor15_ep>; + }; + }; + }; + + /* GMSL deserializer 3 sensor 0 */ + lm_slot12: qcom,cam-gmsl-sensor12 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <12>; + csiphy-sd-index = <3>; + + port { + gmsl_sensor12_ep: endpoint { + remote-endpoint = <&deser3_port0>; + }; + }; + }; + + /* GMSL deserializer 3 sensor 1 */ + lm_slot13: qcom,cam-gmsl-sensor13 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <13>; + csiphy-sd-index = <3>; + + port { + gmsl_sensor13_ep: endpoint { + remote-endpoint = <&deser3_port1>; + }; + }; + }; + + /* GMSL deserializer 3 sensor 2 */ + lm_slot14: qcom,cam-gmsl-sensor14 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <14>; + csiphy-sd-index = <3>; + + port { + gmsl_sensor14_ep: endpoint { + remote-endpoint = <&deser3_port2>; + }; + }; + }; + + /* GMSL deserializer 3 sensor 3 */ + lm_slot15: qcom,cam-gmsl-sensor15 { + compatible = "qcom,cam-gmsl-sensor"; + cell-index = <15>; + csiphy-sd-index = <3>; + + port { + gmsl_sensor15_ep: endpoint { + remote-endpoint = <&deser3_port3>; + }; + }; + }; + + actuator_cam3: qcom,actuator3 { + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&vreg_s4a>; + regulator-names = "cam_vaf"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + cell-index = <19>; + status = "okay"; + }; + + /*EEPROM3: OV13B10*/ + eeprom_cam3: qcom,eeprom3 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend>; + gpios = <&tlmm 75 0>, + <&pmm8654au_0_gpios 10 0>, + <&expander0 7 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK3", + "CAMIF_RESET3", + "CAM_CUSTOM3"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <19>; + status = "okay"; + }; + + /*cam3: OV13B10*/ + lm_slot19: qcom,cam-sensor3 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam3>; + actuator-src = <&actuator_cam3>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend>; + gpios = <&tlmm 75 0>, + <&pmm8654au_0_gpios 10 0>, + <&expander0 7 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK3", + "CAMIF_RESET3", + "CAM_CUSTOM3"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <19>; + status = "okay"; + }; + + /*EEPROM3: IMX858*/ + eeprom_cam7: qcom,eeprom7 { + compatible = "qcom,eeprom"; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend>; + gpios = <&tlmm 75 0>, + <&pmm8654au_0_gpios 10 0>, + <&expander0 7 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK3", + "CAMIF_RESET3", + "CAM_CUSTOM3"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <23>; + status = "okay"; + }; + + /*cam3: IMX858*/ + lm_slot23: qcom,cam-sensor7 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + eeprom-src = <&eeprom_cam7>; + actuator-src = <&actuator_cam3>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <4000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend>; + gpios = <&tlmm 75 0>, + <&pmm8654au_0_gpios 10 0>, + <&expander0 7 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-req-tbl-num = <0 1 2>; + gpio-req-tbl-flags = <1 0 0>; + gpio-req-tbl-label = "CAM_MCLK3", + "CAMIF_RESET3", + "CAM_CUSTOM3"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <19200000>; + cell-index = <23>; + status = "okay"; + }; + + /*cam3: IMX577 - 22pin connector*/ + lm_slot27: qcom,cam-sensor11 { + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <3>; + sensor-position-roll = <0>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + cam_vio-supply = <&vreg_s4a>; + regulator-names = "cam_vio"; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000>; + rgltr-max-voltage = <1800000>; + rgltr-load-current = <120000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend>; + gpios = <&tlmm 75 0>, + <&pmm8654au_0_gpios 10 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAM_MCLK3", + "CAMIF_RESET3"; + cci-master = <0>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "nominal"; + clock-rates = <24000000>; + cell-index = <27>; + status = "okay"; + }; +}; + +&soc { + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-draco-evk-camx.dtso b/arch/arm64/boot/dts/qcom/lemans-draco-evk-camx.dtso new file mode 100644 index 0000000000000..8d77011bdc05c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-draco-evk-camx.dtso @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include +#include +#include + +#include "lemans-camera.dtsi" +#include "lemans-draco-evk-camera-sensor.dtsi" + +&camss { + status = "disabled"; +}; + +&tlmm { + cam_sensor_active_rst0: cam-sensor-active-rst0 { + /* RESET */ + mux { + pins = "gpio132"; + function = "gpio"; + }; + + config { + pins = "gpio132"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_active_rst1: cam-sensor-active-rst1 { + /* RESET */ + mux { + pins = "gpio133"; + function = "gpio"; + }; + + config { + pins = "gpio133"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_active_rst2: cam-sensor-active-rst2 { + /* RESET */ + mux { + pins = "gpio134"; + function = "gpio"; + }; + + config { + pins = "gpio134"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_active_rst3: cam-sensor-active-rst3 { + /* RESET */ + mux { + pins = "gpio135"; + function = "gpio"; + }; + + config { + pins = "gpio135"; + bias-disable; /* No PULL */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + cam_sensor_suspend_rst0: cam-sensor-suspend-rst0 { + /* RESET */ + mux { + pins = "gpio132"; + function = "gpio"; + }; + + config { + pins = "gpio132"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + cam_sensor_suspend_rst1: cam-sensor-suspend-rst1 { + /* RESET */ + mux { + pins = "gpio133"; + function = "gpio"; + }; + + config { + pins = "gpio133"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + cam_sensor_suspend_rst2: cam-sensor-suspend-rst2 { + /* RESET */ + mux { + pins = "gpio134"; + function = "gpio"; + }; + + config { + pins = "gpio134"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; + + cam_sensor_suspend_rst3: cam-sensor-suspend-rst3 { + /* RESET */ + mux { + pins = "gpio135"; + function = "gpio"; + }; + + config { + pins = "gpio135"; + bias-pull-down; /* PULL DOWN */ + drive-strength = <2>; /* 2 MA */ + output-low; + }; + }; +};